Walking Icon steps taken Clock Icon minutes Total UnSit Time UnSit Treadmill Desk owners have collectively walked this much. To contribute, download the UnSit App and pair it to your WALK-1 Treadmill

Height Adjustable Desk-1

Desk-1_bgwhite.jpg
Desk-1_Controller.JPG
Desk-1_movement.jpg
Desk-1_bgwhite.jpg
Desk-1_Controller.JPG
Desk-1_movement.jpg

Height Adjustable Desk-1

795.00

FREE Shipping through September - We'll pay the freight to get it to you!
30-Day Money Back
Testimonials

The Desk-1 is a commercial quality, solid and sturdy height AND width adjustable desk. It features electronically controlled height adjustment from 29 inches up to 48 inches, four pre-set memory settings, a commercial-thickness wood veneered laminated desktop, and a lifetime warranty on frame – 3 years on motors and controller.

Quantity:
Add To Cart

See Owner's Manual.

 

Features

  • Electronically controlled Height Adjustment from 29 inches up to 48 inches.
  • Four pre-set memory settings
  • Sturdy triangulated commercial strength frame.
  • Floor Levelers on all four contact points. 
  • Downward facing telescoping leg mechanism.
  • Two synchronized motors easily accessible for service or replacement.
  • Commercial thickness wood veneered laminated desktop.
  • Lifetime warranty on frame – 3 years on motors and controller.
  • Made with UL/ETL Certified components
  • Quality certified by BIFMA/ANSI

 

Specs

DESKTOP 57.75” x 28” x 1.125” – Commercial wood veneer laminate
HEIGHT Adjusts from 29 inches up to 48 inches
LIFTING CAPACITY 530 lbs - (240 kgs)
DIMENSIONS 28” deep x 60” wide x 27” up to 47” tall
LIFTING CAPACITY 530 lbs - (240 kg)
ELEVATION SPEED 1.5 inches/second (38mm/second)
ELECTRICAL REQUIREMENTS 120VAC - 15 amps
FRAME WIDTH Can be adjusted from 33” out to 54”
FRAME WEIGHT 64lbs – (29kg)
DESKTOP SURFACE WEIGHT 45lbs – (20kg)
COMBINED WEIGHT 109 lbs – (49kg)

Assembly

Assembly takes about 45 minutes and requires bolting the two legs to the main frame and tightening 20 Allen bolts. Assembly may require two people to lift and maneuver. One Allen key wrench is included. The desktop surface must then be screwed to the frame. Holes have been pre-drilled but you need a good Phillips head screw driver, and/or a motorized drill/screwdriver. The controller needs to be screwed under the desk’s surface and wires tied up for neatness.

Reviews